lindab | we simplify construction Active chilled beam Plafond Data Versions Plafond is an exposed, 1-way active chilled beam installed in the corner between the ceiling and the wall. It is available in three different designs: A, B and C. Lengths: Plafond is available in lengths from 1.2 m to 3.6 m in steps of 0.1 m. Hight and width: Plafond B has the format 320 × 301 mm. Plafond C has the format 240 × 230 mm. Plafond D has the format 357 × 301 mm. Water connection: The cooling water connections are 12 mm. Air connection: The air connection can be rotated into a horizontal or vertical position, Ø 100 mm. Design: Plafond C is perforated with longitudinal slots (Slot 50%, see page 3 and 4). Nozzle angle: The nozzles can be ordered with different angles, 0°, 16° or 30°. The default is 30°. Surface treatment: Plafond is manufactured as stand- ard from enamelled sheet metal. Airflow control: The product has a preset pressure drop value, so on-site adjustment is not necessary. A prereq- uisite is that the duct system in the building has a rela- tively low-pressure drop compared to that of the product. Where a damper is desired, you can order a balancing damper. Colour The product is available as standard, in signal white RAL 9003 or in pure white RAL 9010, gloss value 30. Other RAL colours on request. Pascal Water Solution The beam can be easily integrated/used in a Pascal water system to enable VAV/DCV. Please refer to: Pascal Water Solution documentation. Plus features Factory preinstalled. Heating: The product can be equipped with an addition- al water circuit, with 12 mm connections, in the battery to provide a heating function. Integrated valve and actuator: A control valve, with variable Kv value, and an actuator can be pre-installed in the product. Integrated Regula Secura: There is an option to have Lindab's Regula Secura condensation guard installed in the product. Integrated Regula Connect: The product can be equipped with Regula Connect connection card (refer to the chapter Regula). Exhaust air valve: The product can be delivered with build in exhaust valve. Air connection: The beam is available with aditional Ø100 connection on the opposite side. Design: There is another perforation pattern available (Dotx2 50%, see page 3). Air boost: Additional nozzles and plugs for future flex- ibility. Information Extended cover: Where it is installed with a horizontal air and water connection, the product’s cover can be extended to conceal the connection pipes (see figure 11, 12). The cover can be produced in lengths of up to 3.6 m. The extended underside also includes wall or ceiling attachments. Accessories Delivered separately. Control: Refer to chapter Regula. Side covers: Available in lengths of up to 3.6 m. Supplied non-perforated. Hangers: For recommended installation principles (see: “Plafond Installation Instruction”). All these different hangers are available at Lindab: -pendulum hangers (in different sizes) -threaded rods M8 -wiring hanger system For additional accessories please refer to the “Accessories” document on www.lindqst.com. We reserve the right to make changes 5 2019-06-20
Download PDF file