lindab | we simplify construction Active chilled beam Architect Data Variants Architect is an exposed, 2-way active chilled beam installed as an independent part of any ceiling or as a free hanging beam. Wall mounting also possible. Available in 3 different designs: Luna, Circum and Prisma and is standardly pre- pared for ventilation and cooling (2-Pipe connection). Lengths: Architect is available in lengths from: 1.2 [m] to 3.0 [m] ( in steps of 0.1 [m] ). Width: According to type between 497 and 523 [mm] (see table 1). Height: Is 175 [mm] for all different types. Water connection: The cooling water connections are 12 [mm]. JetCone: The JetCone is a standard feature. The factory pre-settings will be done according to desired pressure [Pa] and supply air flow [l/s] and can be changed easily on site. Angled Nozzles: The Angled Nozzles are manufactured in a fixed position and cannot be retrofitted or changed (default is 30°). Air connection: The air connection is horizontal or vertic al, Ø125 [mm]. Design: Architect is supplied as standard with perforation Slot 50%, see page 3. Surface treatment: Architect is manufactured as standard from enamelled sheet metal. Colour The product is available as standard, in signal white RAL 9003 or in pure white RAL 9010, gloss value 30. Other RAL colours on request. Pascal Water Solution The beam can be easily integrated/used in a Pascal water system to enable VAV/DCV. Please refer to: Pascal Water Solution documentation. Plus features Factory preinstalled. Heating: The product can be equipped with an additional water circuit, with 12 [mm] connections, in the battery to provide a heating function. Integrated Regula Secura: Lindab's Regula Secura con- densation protection can be installed in the product. Integrated Regula Connect: The product can be equipped with the Regula Connect connection card. Please see the Regula chapter for further information. Integrated valve and actuator: A control valve, with vari- able Kv value, and an actuator can be pre-installed in the product. Design: Other perforation Dot2x 50% is available on request (see page 3). Wall installation: Architect can also be mounted hori zontally or vertically on to a wall. Contact Lindab for more detailed information. Extended cover: Where it is installed with a horizontal air and water connection, the product’s cover can be extended to conceal the connection pipes. The cover can be pro- duced in lengths of up to 3.6 [m]. The extended underside also includes wall or ceiling attachments. Air connection: The beam is available with aditional 125 [mm] connection on the opposite side. Accessories Delivered separately. Control: Refer to the chapter Regula. Hangers: For recommended installation principles (see: “Architect Installation Instruction”). All these different hangers are available at Lindab: -pendulum hangers (in different sizes) -threaded rods M8 -wiring hanger system For additional accessories please refer to the “Accessories” document on www.lindQST.com. Lindab reserves the right to make changes without prior notice 5 2020-05-12
Download PDF file