lindab | we simplify construction Regula Master HTML Pascal Alarms and handling In Regula Master there is a menu item called Alarm Events, where the alarms are listed. If an alarm condition occurs the Alarm LED on the front panel will start flashing. The LED will continue to flash as long as there are unacknowledged alarms. Alarms are logged in the alarm list. The list shows type of alarm, date and time for the alarm. To access the alarm list, press the alarm button, the front panel button with the red button-top. RM display buttons: View alarms Scroll up Red LED Alarm indicator Green LED Write indicator One step OK back ( Left ) C Select ( Right ) Erase Scroll down Confirm If there are multiple alarms, this is indicated by up / down arrow symbols at the right-hand edge of the display. Use the UP and DOWN buttons to access the other alarms. At the left end of the bottom display line the alarm status is shown. For active, unacknowledged alarms the space is blank. For alarms that have cancelled the text: “cancelled” is shown. Acknowledged, still active or blocked alarms are indicated by Acknowledged or Blocked . Alarms are acknowledged by pressing the OK button. You are then given the choice of acknowledging the alarm or blocking the alarm. Acknowledged alarms will remain on the alarm-list until the alarm input signal is cancelled. Blocked alarms remain on the alarm list until the alarm is cancelled and the block has been removed. New alarms of the same type will not be activated as long as the block remains. Since blocking alarms can be potentially hazardous, you need a high log on authority to block alarms. Alarms in LRM/SRM "Inspection activated" Alarm when inspection is active "SRC override" Alarm when override SRC is active "ERC override" Alarm when override ERC is active ”Damper error SRC 1-26” If the damper connected to the activated SRC haven’t moved more than the set hysteresis ( in 2% ) within the set (23 time). Note! Is only alerting if the fan is running (DI1 is connected to C+ or DI1 is activated via communication). "Damper error ERC 1-16" If the damper connected to the activated SRC haven’t moved more than the set hysteresis ( in 2% ) within the (23 time). Note! Is only alerting if the fan is running ( DI1 is connected to C+ or DI1 is activated via communication). "Presence sensor alarm SRC 1-26" If the mode doesn´t change from standby to occupied within the set time. (default 24h) "Comm. Error FTMU 1-8" If there is no communication to the activated UL. (60 sec delay) ”Comm. Error SRC 1-26” If there is no communication to the activated SRC ( 60 sec delay ). ”Comm. Error ERC/EUC 1-16” If there is no communication to the activated ERC ( 60 sec delay ). Lindab reserves the right to make changes without prior notice 5 2020-07-09
Download PDF file