lindab | we simplify construction Heating and cooling panels Atrium Plana Use Lindab’s heating and cooling panels are installed in the ceiling and primarily provide heating by radiation. The radiation share for the panels exceeds 50% to 60%, compared to approx. 5% for conventional fin coil produ- cts. Since the air velocities can be kept low, the result is a draught-free environment. Radiant heating can also be used with high ceiling heights since the radiant heating, despite the high placement, heats the underlying surfaces directly without any losses to the air. The lower temperature gradient and the increased radia- tion temperature provided by the panel results in an ener- gyefficient heating alternative compared to other heating systems. Installation Atrium Plana is installed either exposed or recessed in a suspended ceiling. Worth noting A high radiation quotient results in low air velocities and provides excellent results, even when high installation heights apply. The low weight ensures quick and effort- less installation. Lindabs radiant panels are tested according to EN-14037/ EN-14240 and are CE-marked. Key figures Length: Width: Height: Capacity: 600, 1200, 1800, 2400, 3000, 3600 mm 400, 600, 900, 1200 mm 35 mm Cooling: 718 W or 168 W/m² Heating: 1260 W or 295 W/m² Calculation setup Room temp: 25°C/21°C, Water temp: 14-17°C/55-45°C. 2 Lindab reserves the right to make changes without prior notice 2021-08-11
Download PDF file