lindab | we simplify construction Heating and cooling panels Atrium Loggia/-H/-C Data Variants The panels are available in three different versions: Loggia, Atrium-H and Atrium-C. Loggia are heating strips without end-pieces for indus- trial use. Atrium-H is equipped with end-pieces. Width 60 (600 mm) is adapted in size, -8 mm, so as to facilitate instal- lation in a suspended ceiling using a standard T-profile with 600-mm module. Atrium-C is a cooling panel and is supplied without insu- lation. Width 60 (600 mm) is adapted in size, -8 mm, so as to facilitate installation in a suspended ceiling using a standard T-profile with 600-mm module. The panels are available in three different widths: 330 (width 33), 600 (width 60) and 870 mm (width 87). The height is always 60 mm. Lengths: Available in lengths from 1.2 m to 6.0 m in steps of 0.1m. Water connection: Available with four different con- nections, depending on the width of the product – 10, 12, 15 and 22 mm. This allows the pressure drop to be adjusted for different dimensioning cases. Insulation: Atrium H- and Loggia panels are insulated with white extruded polystyrene foam and should not be placed in direct sunshine or underneath other heating- or ignition sources. Sparks and smoke must be avoided. Manufactured without the addition of CFC or HCFC gas i. e. freons. For full technical data sheet please contact Lindab. Surface treatment: The panels are powder-coated. Colour The product is available as standard, in signal white RAL 9003 or in pure white RAL 9010, gloss value 30. Other RAL colours on request. Plus features Factory preinstalled. Hygienic design: For premises with very high hygiene requirements, Atrium and Atrium-C are available with the top covered in aluminium and with the joints sealed with a white sealing compound. The panel can then be disinfected or rinsed. For this purpose hygienic cover suspension brackets are available in different standard colors and all different panel sizes. For further detail please contact Lindab. Accessories Delivered separately. Control: Refer to the chapter Regula. Connection cover: Conceals visible piping to a wall (ATR-CW; see figure 1) or in between panels (ATR-CC). Indicate the total length (in mm), between the objects, when you place your order. Figure 1. Atrium with connection cover (ATR-CW). Suspension options: Mounting equipment for sus- pended or direct-to-ceiling mounting are available as accessories. Please refer to page 17 for further details or/and to "Atrium Installation Instruction" For additional accessories please refer to the “Accessories” document on www.lindQST.com. Lindab reserves the right to make changes without prior notice 5 2021-05-21
Download PDF file