lindab | we simplify construction Heating and cooling panels Atrium Loggia/-H/-C Use Lindab's heating and cooling panels are mounted in the ceiling and primarily provide heating/cooling by radia- tion. The radiation share for the panels exceeds 50% to 60%, compared to approx. 5% for conventional finned products. Since the air velocities can be kept low, this results in a draught-free environment. Radiant heating can also be used with high ceiling heights since the radiant heating, despite the high place- ment, heats the underlying surfaces directly without any losses to the air. The lower temperature gradient and the increased radia- tion temperature also results in energy-efficient heating alternatives compared to other heating systems. Installation The heating/cooling panels are installed either sus- pended or recessed into a suspended ceiling. The panels can be supplied with different connection alternatives, depending on whether they are to be mounted individu- ally or in series. Worth noting A high radiation quotient results in low air velocities and provides very good functioning, even with high installa- tion heights. The low weight ensures quick installation. The weight for a panel, which is 6 m long and 87 cm wide, does not exceed 18 kg. These are by far the light- est heating and cooling panels available on the market. The cooling panels can also be supplied perforated, to ensure high sound absorption in office environments. Lindabs radiant panels are tested according to EN-14037/ EN-14240 and are CE-marked. Key figures Length: Width: Height: Capacity: 1200 - 6000 mm (steps of 100 mm) 330, 600, 870 mm 60 mm 1610 W Calculation setup Room temp: 21°C, Water temp: 55-45°C. 2 Lindab reserves the right to make changes without prior notice 2021-05-21
Download PDF file