RIRS V EKO EC A1/L2 AIR HANDLING UNITS Application Description Controls The main Features Rotor Construction V [m 3 /h] Ventilation of houses, small public buildings, offices or other heated premises (classrooms, apartments, conference rooms, etc.). RIRS V EKO 3.0 is a range of heat recovery units with high-efficiency rotor heat exchangers. Units are de- signed for vertical placement in auxiliary non-heated premises (basements, boiler rooms, etc.). There are 7 sizes (airflow interval 420-5600 m 3 /h) with separate heaters available for different climate zones. RIRS V EKO 3.0 units have high overall energy savings due to the highly efficient heat recovery (up to 85%), quiet and economical EC fans, effective low pressure drop filters and top-level of air tightness. All RIRS V EKO 3.0 units are fully equipped with automatic controls. Optional external sensors for CO 2 and humidity and so the summer mode feature will guarantee the high- est comfort (demand-level control). RIRS V EKO 3.0 units are service-friendly and easy to mount. Filter pollution may be identified by timers or contamination controls (RIRS 1200-5500 V EKO 3.0). Rotor fault indicator is included in every AHU. All units are supplied tested and ready to install. Three remote control options are available: 1. Flex, Stouch or Ptouch remote controllers. 2. Building management system connections. 3. Remote control via PC MB-Gateway. › Efficient rotor heat exchanger with up to 85% heat recovery. › Water/electrical heating options. › Easy and quick mounting. › Controlled airflow. › Fully integrated plug-and-play control system. › Outdoor versions and convertible inspection side. › Eurovent certified. › Plate gap 1,4-1,9 mm. › Rotor fault indicator. › Minimal airflow mixing. › Appropriate “Purge sector” size (for RIRS 2500, 3500 and 5500 V EKO 3.0). › Frameless construction from double-skinned steel, with powder coated paint, panels. › Acoustic and thermal wall insulation – 50 mm. › Hinged door with locks grants easy access to internal components. › Separate compartment on the side of the unit grants quick access to the control board (plug-and-play). › Three sensors for fresh, supply and extract air temperatures. › Anti-vibration pads (optional for RIRS 400-1900 V EKO 3.0; standard for RIRS 2500-5500 V EKO 3.0). › Water heater with frost protection kit available. › Low pressure drop filters: F7/M5. › Integrated electrical heater or optional water heater/cooler (on duct). › Outdoor versions (RIRS 2500, 3500, 5500 V EKO 3.0). › RHX versions (rotor speed control, using stepper motor and driver). › Integrated pressure switch for filter pollution alarm (RIRS 1200 - 5500 V EKO 3.0). 112 The company reserves the right to make changes of technical data without prior notice
Download PDF file