Jalousie damper Technical data Damper overview The dampers are supplied in combinations of heights and widths as indicated in the table below. The top figures in the table specify weight (kg) of the individual dampers. The lower figures specify the dampers' torque (Nm) for the selection of a damper motor. lindab | dampers and measure units JSM Torque Nm 5 10 20 30 Motor type LM NM SM GM B kg 100 Nm kg 200 Nm kg 300 Nm kg 400 Nm kg 500 Nm kg 600 Nm kg 800 Nm kg 1000 Nm kg 1200 Nm kg 1400 Nm kg 1600 Nm 200 2,3 2,0 2,7 2,0 3,0 2,0 3,3 3,0 3,6 3,0 3,9 4,0 7,1 4,0 8,6 5,0 12,7 5,0 14,7 7,0 16,2 8,0 300 2,7 2,0 3,0 2,0 3,3 3,0 3,6 3,0 5,4 4,0 6,3 4,0 7,9 4,0 10,6 5,0 13,7 5,0 16,2 7,0 18,5 8,0 400 2,0 3,3 2,0 3,6 3,0 5,4 4,0 6,3 4,0 7,1 4,0 8,6 5,0 11,7 5,0 14,7 7,0 17,7 8,0 20,7 8,0 500 3,6 2,0 5,4 4,0 6,3 4,0 7,1 4,0 7,9 5,0 10,6 5,0 13,7 7,0 16,2 8,0 18,5 8,0 22,1 8,0 A 600 5,4 2,0 6,3 4,0 7,1 4,0 7,9 5,0 8,6 5,0 11,7 5,0 14,7 7,0 17,7 8,0 20,7 8,0 23,6 8,0 800 1000 1200 1400 1600 7,1 4,0 7,9 10,6 13,7 4,0 5,0 8,0 8,6 11,7 14,7 17,7 20,7 4,0 5,0 8,0 8,0 8,0 10,6 13,7 16,2 18,5 22,1 5,0 7,0 8,0 8,0 8,0 12,7 14,7 17,7 20,7 23,6 5,0 8,0 8,0 8,0 8,0 14,7 17,7 20,7 23,6 26,6 7,0 8,0 8,0 8,0 8,0 17,7 20,7 23,6 26,6 29,6 8,0 8,0 8,0 8,0 10,0 20,7 23,6 26,6 29,6 32,5 8,0 8,0 8,0 10,0 10,0 23,6 26,6 29,6 32,5 35,5 8,0 8,0 10,0 10,0 13,0 26,6 29,6 32,5 35,5 38,4 8,0 8,0 10,0 13,0 15,0 The height B is always a multiple of 100 mm (the width of the damper blades). The dampers can be supplied deviant from this, but the free area will always be the number of slats times 100 mm (minus the damper blade's thickness) with the rest exposed. E.g. if a damper with A > 500 and B = 275 mm is chosen, then the free area in this damper will be same as a damper with the measurements A = 500 and B > 200 mm. (* minus the thickness of the damper blade) Lindab reserves the right to make changes without prior notice 4 2018-03-06
Download PDF file