Smoke Control Damper Dimensions Min. 160x180 Max. 1500x800 lindab | smoke SDR1-M Technical data for the actuators See the technical manual. Description Rectangular smoke control damper for smoke and heat evacuation systems for multi compartment. The body is made of galvanized steel. In the event of a fire, the smoke and heat will be extracted throughout the smoke control system and this damper is designed to either open or close depending on the scenario, to be able to extract the smoke and heat out of the building. This damper is equipped with an actuator, either 24V or 230V and can only be used as an automatic activation (AA) damper. It is CE marked and certified according to EN12101-8, tested according to EN1366-10 and classified according to EN13501-4. The damper is suitable for installation with horizontal blade axes in multi compartment smoke duct evacuation systems according to EN1366-8 with smoke leakage class S at 1000Pa negative pressure. Classifications (EN13501-4) – SDR1-M EI120 (v ew – h ow – i ↔ o)S 1500 C 10000 AA Multi In construction with Weichschott: EI90 (h ow – v ew – i ↔ o)S 1500 C 10000 HOT400/30 AA multi On duct with grille: EI120 (h od – v ed – i ↔ o)S 1500 C 10000 HOT400/30 AA multi On duct without grille: EI90 (h od – v ed – i ↔ o)S 1500 C 10000 HOT400/30 AA multi Ordering example SDR1-M 160 180 230V Yes Product Width Height Actuator - 230V/24V BKN Module - Yes/No Example: SDR1-M-160-180-230V-BKN Lindab reserves the right to make changes without prior notice 1 2021-01-12
Download PDF file